How to repair Print Spooler in Windows 11/10

In this post, we will show you how to repair Print Spooler Service in Windows 11/10. Impress Spooler (executable file) is a built-in feature of Windows that handles impress jobs. Near of the fourth dimension, the service works but fine. Simply, sometimes users face many problems like Print Spooler service is not running, Impress Spooler service error 1068, Impress Spooler mistake 0x800706B9, etc. If yous are also facing some kind of event with it, and then this post might help y'all repair Print Spooler in Windows 11/10 with some fixes.

Repair Print Spooler in Windows xi/10

Earlier, at that place was a Microsoft Fix It tool for repairing Print Spooler, but that tool was discontinued. Therefore, you can try some manual fixes covered in this mail to repair it.

1. Enable or plough on Print Spooler
2. Restart Print Spooler service using Job Manager
3. Reset and Articulate Print Spooler using Command Prompt
4. Add required binary files for Print Spooler
5. Make sure Print Spooler dependencies are running
6. Using Registry Editor.

1] Enable or turn on Print Spooler

If the Print Spooler service is not running at all, then it might exist possible that the service is disabled or turned off, or stopped. So, commencement, you need to plow on or enable Print Spooler service using Windows Services Manager or another ways. Once the service is started successfully, you might be able to use it without whatsoever result.

2] Restart Print Spooler service using Task Managing director

If this service is already running and all the same yous are facing some kind of issue, then a elementary restart for this service might help you fix the issue you're facing. You can restart Impress Spooler using Task Manager. The steps are every bit follows:

1. Open up Job Managing director using the Search box or in whatever other preferred way
2. Click on the More details option to access all the tabs
3. Switch to the Services tab
4. Scroll downward and select Spooler service
5. Right-click on Spooler
6. Click on the Restart option.

3] Reset and Articulate Print Spooler using Command Prompt

If at that place is some print job(s) stuck in the print queue, and so also it is the possibility that Print Spooler is not working as information technology should. And so, it is good to reset and articulate Print Spooler. This can exist done using Control Prompt. Here are the steps:

Open Command Prompt as administrator

Execute the following command:

cyberspace stop spooler

This will cease the Print Spooler service which is handy so that the reset process can take place successfully

Next, Run the following command:

DEL /F /S /Q %systemroot%\System32\spool\PRINTERS\*

This will begin and complete the reset process and remove stuck jobs (*.shd and *.spl files)

Finally, execute this control. This volition outset the Print Spooler again.

cyberspace get-go spooler

This should solve your problem.

You lot can besides delete SHD and SPL files manually. For this, access the PRINTERS binder. Its path is here:

C:\Windows\System32\spool\PRINTERS

Look for those files and delete them manually.

four] Add required binary files for Impress Spooler

The required DLL and EXE files for Impress Spooler must be present to make information technology work properly. These files are spoolss.dll, win32spl.dll, spoolss.exe, and localspl.dll. All these files are present in the System32 folder (C > Windows > System32). Check if all such files are at that place or non. If not, you need to set the missing DLL files and EXE files for Print Spooler.

After that, Print Spooler should piece of work fine.

5] Make sure Print Spooler dependencies are running

In that location are many services that depend on other services or arrangement components to work properly. The aforementioned goes for Impress Spooler also. So, you lot need to find all such dependencies and run or kickoff them if non already.

To do this, you tin open Windows Service Manager, and so discover the Dependencies for Print Spooler by accessing its backdrop window. Later on that, run all such dependency services using the same Windows Service Manager.

6] Using Registry Editor

This selection might is a bit complicated. Registry Editor stores the important entries (keys and values) for system files and other applications. In that location are Print Spooler Registry entries also nowadays that have to be there to make information technology piece of work correctly. If those files are not present, it can crusade issues that Print Spooler is not responding properly. And then, bank check such entries and create Registry keys and values if such entries don't be.

Before trying whatsoever of the below-mentioned options, take a backup of Registry so that you can restore it later if needed.

1. Add standard print monitor keys and their values
2. Add together winprint Registry key and its String Value
3. Delete any fake path for SpoolDirectory String Value of your printer,

one] Add standard print monitor keys and their values

Advisedly follow all the steps:

• Launch or open Registry Editor of Windows 10
• Access Monitors registry key. The path is:

HKEY_LOCAL_MACHINE\Organisation\CurrentControlSet\Control\Print\Monitors

• Create Local Port, Standard TCP/IP Port, and USB Monitor registry keys under Monitors key
• Create Driver name Cord Value in all the above-mentioned registry keys
• Double-click on Driver value for Local Port key
• Add localspl.dll in the Value data box
• Printing OK
• Double-click on Drive String value for Standard TCP/IP Port primal
• Add tcpmon.dll in Value data box
• Printing OK
• Double-click on Commuter value for USB Monitor key
• Add usbmon.dll in Value data box
• Printing OK.

2] Add winprint Registry central and its String Value

• Open Windows x Registry Editor
• Access Impress Processors primal. The path is:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Print Processors

• Create a winprint Registry key under the Impress Processors key
• Create Commuter proper noun String Value on the right-hand side
• Double-click on Drive String Value
• Add winprint.dll entry in the Value data field
• Press OK.

iii] Delete any simulated path for SpoolDirectory String Value of your printer

This option might help if you accept connected multiple printers with your computer. Some infectious files or malware might have added some imitation path in the Value information field of SpoolDirectory String Value of your printer nowadays in the Registry Editor. That might be causing an obstacle in using Impress Spooler perfectly. So, deleting that fake path might help. The steps are:

• Open up Registry Editor
• Admission Printers Here is the path:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print\Printers

• Nether Printers, click on the Printer name that is causing the problem
• On the right-paw side, whorl down and double-click on the SpoolDirectory String value
• Clear or remove all the entries present in the Value data field
• Printing the OK button.

Print Spooler Repair tool

In that location used to exist a Fix-Information technology equally well as a Print Spooler Cleanup Diagnostic Tool from Microsoft simply that is now not bachelor. The Printer Troubleshooter is the closest yous have.

Yous may endeavour this gratuitous 3rd-party tool called Fix Print Spooler from sordum.org and see if that helps y'all.

Hope something from these fixes helps you. If it does not, you may need to consider Reset This PC option.

Source: https://www.thewindowsclub.com/print-spooler-repair-in-windows-10

Posted by: beaverondowde.blogspot.com

Share this post